PEEKRodBlack
PEEK - 0.875" dia x 120 Black Rod - 120 in Rod
120 in Rod
Same-day shipping available
Quality certified
Expert support
This PEEK rod measures 0.875″ diameter × 120″ length, finished in black. In stock — price $440.30 per Each.
| Specification | Value | Tolerance |
|---|---|---|
| Shape / Form | Rod | |
| Diameter | 0.875″ | Standard |
| Length | 120″ | Standard |
| Color | Black | |
About This Product
PEEK (Polyether Ether Ketone) Black rod in 0.875" diameter x 120" long stock is a high-performance engineering plastic built for demanding mechanical and thermal environments. This black PEEK rod offers outstanding heat and chemical resistance, along with excellent strength, wear performance, and dimensional stability for precision-machined components.
Specifications
Shape
Rod
Length
120 inOuter Diameter
0.875 inColor
Black
Unit of Measure
Each
Other PEEK sizes
- PEEK - 1.000" x 120 Natural Rod — $380.32
- PEEK - 0.250" dia x 24 Natural Rod — $5.74
- PEEK - 1.000" 12 x 12 Black Sheet — $950.04
- PEEK - 0.500" 24 x 48 Black Sheet — $4111.55
- PEEK - 1.750" 12 x 12 Black Sheet — $1260.26
- PEEK - 2.000" 24 x 48 Natural Plate — $9366.68
- PEEK - 0.750" x 120 Natural Rod — $214.13
- PEEK - 6.000" x 120 Natural Rod — $13411.22
- PEEK - 0.080" 12 x 12 Natural Sheet — $161.83
- PEEK - 0.375" 24 x 48 Natural Plate — $1844.09
- PEEK - 1.000" 24 x 48 Natural Plate — $4750.06
- PEEK - 0.040" 12 x 24 Natural Sheet — $163.73
Price
$440.30 / Each
In Stock
21010 availableAvailable at 11 locations
Minimum order: 2 units
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
CategoryPEEK
FormRod
Length120 in
Outer Diameter0.875 in
Typical Properties — PEEK - 0.875" dia x 120 Black Rod
PeekGeneral
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.047 / 1.3
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %5/10 / 0.06/0.12
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%0.20
Water absorption (Saturation in water @ 73°F)ASTM D570%0.45
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94V-0/V-0
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa14,500 / 99
Tensile strain at breakASTM D638%15
Tensile modulusASTM D638psi / MPa566,000 / 3,900
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa20,000 / 135
Izod impact (notched)ASTM D256ft·lb/in / J/m0.8 / 42
Rockwell hardnessASTM D785R120
Operating Environment
PropertyTest MethodUnitValue
Melting temperatureASTM D2133°F / °C640 / 335
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K1.7 / 0.24
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C28 / 50
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C28 / 50
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C320 / 160
Max service temperature (Short-term)°F / °C590 / 310
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C480 / 245
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm610 / 24
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³
Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.