PEEKSheetNatural
PEEK - 0.062" 24 x 36 Natural Sheet - 0.062 in × 24 in × 36 in Sheet
0.062 in × 24 in × 36 in Sheet
Same-day shipping available
Quality certified
Expert support
This PEEK sheet measures 0.062″ thick, 24″ × 36″, finished in natural. In stock — price $828.02 per Each.
| Specification | Value | Tolerance |
|---|---|---|
| Shape / Form | Sheet | |
| Thickness | 0.062″ | Standard |
| Width | 24″ | Standard |
| Length | 36″ | Standard |
| Color | Natural | |
About This Product
PEEK sheet in Natural Polyether Ether Ketone is machined for demanding applications that require exceptional heat and chemical resistance. This 0.062" thick x 24" x 36" length sheet delivers excellent mechanical strength, dimensional stability, and wear performance in high-temperature environments.
Specifications
Shape
Sheet
Thickness
0.062 inWidth
24 inLength
36 inColor
Natural
Unit of Measure
Each
Other PEEK sizes
- PEEK - 0.375" 24 x 48 Natural Plate — $1844.09
- PEEK - 1.500" 24 x 24 Black Sheet — $5703.93
- PEEK - 0.040" 24 x 48 Natural Sheet — $1.65
- PEEK - 0.500" 12 x 12 Natural Sheet — $475.07
- PEEK - 0.375" 24 x 48 Black Sheet — $3089.80
- PEEK - 0.500" 24 x 24 Natural Sheet — $1900.31
- PEEK - 0.625" 24 x 48 Natural Sheet — $4756.57
- PEEK - 0.188" 24 x 48 Natural Sheet — $1.70
- PEEK - 0.375" dia x 120 Black Rod — $8.86
- PEEK - 0.625" 12 x 12 Natural Sheet — $594.56
- PEEK - 9.840" 7.87 x 2 Natural Sheet — $752.32
- PEEK - 0.375" 24 x 48 Natural Sheet — $2856.17
Price
$828.02 / Each
In Stock
21010 availableAvailable at 11 locations
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
CategoryPEEK
FormSheet
Thickness0.062 in
Width24 in
Length36 in
Typical Properties — PEEK - 0.062" 24 x 36 Natural Sheet
PeekGeneral
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.047 / 1.3
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %5/10 / 0.06/0.12
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%0.20
Water absorption (Saturation in water @ 73°F)ASTM D570%0.45
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94V-0/V-0
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa14,500 / 99
Tensile strain at breakASTM D638%15
Tensile modulusASTM D638psi / MPa566,000 / 3,900
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa20,000 / 135
Izod impact (notched)ASTM D256ft·lb/in / J/m0.8 / 42
Rockwell hardnessASTM D785R120
Operating Environment
PropertyTest MethodUnitValue
Melting temperatureASTM D2133°F / °C640 / 335
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K1.7 / 0.24
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C28 / 50
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C28 / 50
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C320 / 160
Max service temperature (Short-term)°F / °C590 / 310
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C480 / 245
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm610 / 24
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³
Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.