PA 6 - Cast NylonRodBlack
Cast Nylon - 9.500" x 24 Black Rod - 24 in Rod
24 in Rod
Same-day shipping available
Quality certified
Expert support
This PA 6 - Cast Nylon rod measures 9.5″ diameter × 24″ length, finished in black. In stock — price $446.25 per Each.
| Specification | Value | Tolerance |
|---|---|---|
| Shape / Form | Rod | |
| Diameter | 9.5″ | Standard |
| Length | 24″ | Standard |
| Color | Black | |
| Weight | 75 lbs | |
About This Product
PA 6 - Cast Nylon rod in Black, made from Cast Nylon 6, measures 9.5" diameter x 24" long for heavy-duty machining and industrial component fabrication. This cast nylon grade is valued for its excellent wear resistance, toughness, and low friction, making it a reliable choice for bushings, rollers, and other high-load applications.
Specifications
Shape
Rod
Length
24 inOuter Diameter
9.5 inWeight
75 lbs
Color
Black
Unit of Measure
Each
Other PA 6 - Cast Nylon sizes
- Cast Nylon - 9.000" x 24 Grey Rod — $400.44
- Cast Nylon - 3.500" x 39 Natural Rod — $100.84
- Cast Nylon - 2.750" x 39 Natural Rod — $62.30
- Cast Nylon - 11.000" x 24 Grey Rod — $598.21
- Cast Nylon - 13.500" x 12 Grey Rod — $484.50
- Cast Nylon - 0.500" 48 x 120 Black Plate — $816.46
- Cast Nylon - 0.625" 48 x 120 Black Plate — $982.63
- Cast Nylon - 2.000" 48 x 120 Black Plate — $3045.38
- Cast Nylon - 1.500" 48 x 120 Blue Plate — $2284.03
- Cast Nylon - 0.375" 48 x 120 Grey Plate — $626.70
- Cast Nylon - 1.500" 48 x 120 Grey Plate — $2284.03
- Cast Nylon - 1.750" 48 x 120 Grey Plate — $2664.72
Price
$446.25 / Each
In Stock
21010 availableAvailable at 11 locations
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
CategoryPA 6 - Cast Nylon
FormRod
Length24 in
Outer Diameter9.5 in
Weight75 lbs
Typical Properties — Cast Nylon - 9.500" x 24 Black Rod
Cast Nylon 6General
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.042 / 1.1
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %44/83 / 0.65/1.22
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%2.2
Water absorption (Saturation in water @ 73°F)ASTM D570%6.5
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94HB/HB
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa12,300 / 84
Tensile strain at breakASTM D638%25
Tensile modulusASTM D638psi / MPa508,000 / 3,500
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa15,000 / 100
Izod impact (notched)ASTM D256ft·lb/in / J/m0.6 / 32
Rockwell hardnessASTM D785R118
Operating Environment
PropertyTest MethodUnitValue
Melting temperatureASTM D2133°F / °C430 / 220
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K2.0 / 0.28
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C44 / 79
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C50 / 90
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C355 / 175
Max service temperature (Short-term)°F / °C340 / 170
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C220/195 / 100 / 90
Min service temperature°F / °C-30 / -34
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm635 / 24
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³
Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.