PA 6 - Cast NylonSheetBlack
Cast Nylon - 2.000" 48 x 120 Black Plate - 2 in × 48 in × 120 in Sheet
2 in × 48 in × 120 in Sheet
Same-day shipping available
Quality certified
Expert support
This PA 6 - Cast Nylon sheet measures 2″ thick, 48″ × 120″, finished in black. In stock — price $3045.38 per Each.
| Specification | Value | Tolerance |
|---|---|---|
| Shape / Form | Sheet | |
| Thickness | 2″ | Standard |
| Width | 48″ | Standard |
| Length | 120″ | Standard |
| Color | Black | |
| Weight | 511.83 lbs | |
About This Product
Black PA 6 - Cast Nylon sheet in Cast Nylon 6 delivers excellent wear resistance, impact strength, and machinability for demanding industrial parts and fabrications. This 2.0" thick, 120" length plate is well suited for bearings, wear pads, and structural components where durability and long service life matter.
Specifications
Shape
Sheet
Thickness
2 inWidth
48 inLength
120 inWeight
511.83 lbs
Color
Black
Unit of Measure
Each
Other PA 6 - Cast Nylon sizes
- Cast Nylon - 9.000" x 24 Grey Rod — $400.44
- Cast Nylon - 3.500" x 39 Natural Rod — $100.84
- Cast Nylon - 2.750" x 39 Natural Rod — $62.30
- Cast Nylon - 11.000" x 24 Grey Rod — $598.21
- Cast Nylon - 13.500" x 12 Grey Rod — $484.50
- Cast Nylon - 0.500" 48 x 120 Black Plate — $816.46
- Cast Nylon - 0.625" 48 x 120 Black Plate — $982.63
- Cast Nylon - 1.500" 48 x 120 Blue Plate — $2284.03
- Cast Nylon - 0.375" 48 x 120 Grey Plate — $626.70
- Cast Nylon - 1.500" 48 x 120 Grey Plate — $2284.03
- Cast Nylon - 1.750" 48 x 120 Grey Plate — $2664.72
- Cast Nylon - 2.500" 48 x 120 Grey Plate — $3812.76
Price
$3045.38 / Each
In Stock
21010 availableAvailable at 11 locations
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
CategoryPA 6 - Cast Nylon
FormSheet
Thickness2 in
Width48 in
Length120 in
Weight511.83 lbs
Typical Properties — Cast Nylon - 2.000" 48 x 120 Black Plate
Cast Nylon 6General
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.042 / 1.1
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %44/83 / 0.65/1.22
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%2.2
Water absorption (Saturation in water @ 73°F)ASTM D570%6.5
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94HB/HB
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa12,300 / 84
Tensile strain at breakASTM D638%25
Tensile modulusASTM D638psi / MPa508,000 / 3,500
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa15,000 / 100
Izod impact (notched)ASTM D256ft·lb/in / J/m0.6 / 32
Rockwell hardnessASTM D785R118
Operating Environment
PropertyTest MethodUnitValue
Melting temperatureASTM D2133°F / °C430 / 220
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K2.0 / 0.28
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C44 / 79
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C50 / 90
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C355 / 175
Max service temperature (Short-term)°F / °C340 / 170
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C220/195 / 100 / 90
Min service temperature°F / °C-30 / -34
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm635 / 24
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³
Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.