Ready Plastics
PEISheetNatural

Ultem 1000 (PEI) - 0.625" 24 x 24 Natural Sheet - 0.625 in × 24 in × 24 in Sheet

0.625 in × 24 in × 24 in Sheet

Ultem 1000 (PEI) - 0.625" 24 x 24 Natural SheetUltem 1000 (PEI) - 0.625" 24 x 24 Natural Sheet - view 2Ultem 1000 (PEI) - 0.625" 24 x 24 Natural Sheet - view 3
Same-day shipping available
Quality certified
Expert support

This PEI sheet measures 0.625″ thick, 24″ × 24″, finished in natural. In stock — price $828.32 per Each.

SpecificationValueTolerance
Shape / FormSheet
Thickness0.625″Standard
Width24″Standard
Length24″Standard
ColorNatural
About This Product

Ultem 1000 (PEI) Natural Sheet in Polyetherimide is supplied in a 0.625" thick, 24" length format for demanding electrical, aerospace, and high-temperature applications. This high-performance PEI sheet offers excellent heat deflection, strong dimensional stability, and reliable mechanical strength where consistent performance is critical.

Specifications

Resin

Ultem 1000

Shape

Sheet

Thickness

0.625 in

Width

24 in

Length

24 in

Color

Natural

Unit of Measure

Each

Other PEI sizes

← All PEIstock & specs

Price

$828.32 / Each

In Stock
21010 available
Available at 11 locations

Minimum order: 2 units

View PEI Details
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
ResinUltem 1000
CategoryPEI
FormSheet
Thickness0.625 in
Width24 in
Length24 in

Typical Properties — Ultem 1000 (PEI) - 0.625" 24 x 24 Natural Sheet

Pei
General
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.046 / 1.2
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %20/41 / 0.26/0.54
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%0.75
Water absorption (Saturation in water @ 73°F)ASTM D570%1.35
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94V-0/V-0
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa15,250 / 105
Tensile strain at breakASTM D638%10
Tensile modulusASTM D638psi / MPa493,000 / 3,300
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa22,000 / 150
Rockwell hardnessASTM D785R126
Operating Environment
PropertyTest MethodUnitValue
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K1.5 / 0.21
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C25 / 45
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C25 / 45
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C375 / 190
Max service temperature (Short-term)°F / °C390 / 195
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C340 / 170
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm685 / 26
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³

Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.

Related Products

Ultem 1000 (PEI) - 0.250" 24 x 48 Natural Sheet

Sheet • 0.25 in × 24 in × 48 in

Ultem 1000 (PEI) - 0.375" dia x 120 Natural Rod

Rod • 120 in

Ultem 1000 (PEI) - 0.375" 12 x 12 Natural Sheet

Sheet • 0.375 in × 12 in × 12 in

Ultem 1000 (PEI) - 0.375" 12 x 48 Natural Sheet

Sheet • 0.375 in × 12 in × 48 in