POM-CRodNatural
POM-C - 7.000" x 48 Natural Rod
48 in Rod
Same-day shipping available
Quality certified
Expert support
About This Product
POM-C Acetal Copolymer Natural rod in 7.0" diameter x 48" long stock is a dependable choice for precision-machined components that require low moisture absorption and consistent dimensional stability. This Natural POM-C rod also offers low friction and good wear resistance, making it well suited for bushings, rollers, fixtures, and other tight-tolerance parts.
Specifications
Shape
Rod
Length
48 inOuter Diameter
7 inPrice
$554.27 / Each
In Stock
21010 availableAvailable at 11 locations
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
Typical Properties — POM-C - 7.000" x 48 Natural Rod
Pom CGeneral
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.051 / 1.4
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %20/37 / 0.24/0.45
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%0.20
Water absorption (Saturation in water @ 73°F)ASTM D570%0.85
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94HB/HB
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa9,450 / 65
Tensile strain at breakASTM D638%30
Tensile modulusASTM D638psi / MPa450,000 / 3,100
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa15,000 / 100
Izod impact (notched)ASTM D256ft·lb/in / J/m0.7 / 37
Rockwell hardnessASTM D785R115
Operating Environment
PropertyTest MethodUnitValue
Melting temperatureASTM D2133°F / °C330 / 165
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K2.1 / 0.3
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C61 / 105
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C69 / 120
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C220 / 100
Max service temperature (Short-term)°F / °C285 / 140
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C240/210 / 115 / 98
Min service temperature°F / °C-50 / -45
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm510 / 20
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³
Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.