PEISheetBlack
Ultem 1000 (PEI) - 0.750" 12 x 36 Black Sheet
0.75 in × 12 in × 36 in Sheet
Same-day shipping available
Quality certified
Expert support
About This Product
Ultem 1000 (PEI) Black Sheet is a high-performance Polyetherimide stock shape measuring 0.75" thick with a 36" length, ideal for demanding electrical, aerospace, and industrial applications. Known for its high heat deflection, excellent dimensional stability, and inherent strength, this black PEI sheet performs reliably where elevated temperatures and tight tolerances matter.
Specifications
Resin
Ultem 1000
Shape
Sheet
Thickness
0.75 inPrice
Contact for pricing
In Stock
21010 availableAvailable at 11 locations
Ships same day if ordered by 2pm
Quality guaranteed
Typical Properties — Ultem 1000 (PEI) - 0.750" 12 x 36 Black Sheet
PeiGeneral
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.046 / 1.2
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %20/41 / 0.26/0.54
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%0.75
Water absorption (Saturation in water @ 73°F)ASTM D570%1.35
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94V-0/V-0
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa15,250 / 105
Tensile strain at breakASTM D638%10
Tensile modulusASTM D638psi / MPa493,000 / 3,300
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa22,000 / 150
Rockwell hardnessASTM D785R126
Operating Environment
PropertyTest MethodUnitValue
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K1.5 / 0.21
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C25 / 45
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C25 / 45
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C375 / 190
Max service temperature (Short-term)°F / °C390 / 195
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C340 / 170
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm685 / 26
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³
Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.