PEI GF30RodNatural
Ultem GF30
120 in Rod
Same-day shipping available
Quality certified
Expert support
About This Product
Ultem GF30 (PEI GF30) rod in Natural is made from 30% Glass Fiber Reinforced Polyetherimide and supplied in a 0.75" diameter x 120" long size for demanding structural and high-heat applications. This glass-filled PEI grade offers enhanced stiffness, improved dimensional stability, and excellent heat deflection performance compared with unfilled PEI.
Specifications
Resin
Ultem GF30
Shape
Rod
Length
120 inPrice
Contact for pricing
In Stock
21010 availableAvailable at 11 locations
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
ResinUltem GF30
Typical Properties — Ultem GF30
Pei Gf30General
PropertyTest MethodUnitValue
DensityISO 1183g/cm³ / lb/in³1.51 / 0.054
Water absorption (24h / 96h (23°C))ISO%0.04 /
Operating Environment
PropertyTest MethodUnitValue
Flammability (UL 94) (corresponding to)IEC—V0
Glass transition temp.ISO°C / °F213 / 415
Service temperature (short term)—°C / °F200 / 390
Service temperature (long term)—°C / °F170 / 335
Mechanical
PropertyTest MethodUnitValue
Tensile strength (5mm/min)ISOMPa / psi135 / 19,500
Tensile modulus (1mm/min)ISOMPa / psi5300 / 768,000
Elongation at yield (5mm/min)ISO%4
Elongation at break (50mm/min)ISO%4
Flexural strength (2mm/min, 10 N)ISOMPa / psi195 / 28,000
Flexural modulus (2mm/min, 10 N)ISOMPa / psi5500 / 797,000
Impact strength (Charpy) (max. 7,5J)ISOkJ/m² / ft·lbf/in²51 / 24
Ball indentation hardnessISOMPa / psi325 / 47,000
Electrical
PropertyTest MethodUnitValue
Surface resistivity—Ω10¹⁴
Volume resistivity—Ω·cm10¹⁴
Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.