PEEKRodBlack
PEEK - 0.250" dia x 120 Black Rod - 120 in Rod
120 in Rod
Same-day shipping available
Quality certified
Expert support
This PEEK rod measures 0.25″ diameter × 120″ length, finished in black. In stock — price $4.01 per Each.
| Specification | Value | Tolerance |
|---|---|---|
| Shape / Form | Rod | |
| Diameter | 0.25″ | Standard |
| Length | 120″ | Standard |
| Color | Black | |
About This Product
Black PEEK rod in Polyether Ether Ketone is supplied in a 0.25" diameter x 120" long size for demanding industrial and machining applications. Known for outstanding high-temperature performance, chemical resistance, and mechanical strength, this PEEK rod is an excellent choice for precision components that must perform in harsh environments.
Specifications
Shape
Rod
Length
120 inOuter Diameter
0.25 inColor
Black
Unit of Measure
Each
Other PEEK sizes
- PEEK - 0.375" 24 x 48 Natural Plate — $1844.09
- PEEK - 1.500" 24 x 24 Black Sheet — $5703.93
- PEEK - 0.040" 24 x 48 Natural Sheet — $1.65
- PEEK - 0.500" 12 x 12 Natural Sheet — $475.07
- PEEK - 0.375" 24 x 48 Black Sheet — $3089.80
- PEEK - 0.500" 24 x 24 Natural Sheet — $1900.31
- PEEK - 0.625" 24 x 48 Natural Sheet — $4756.57
- PEEK - 0.188" 24 x 48 Natural Sheet — $1.70
- PEEK - 0.375" dia x 120 Black Rod — $8.86
- PEEK - 0.625" 12 x 12 Natural Sheet — $594.56
- PEEK - 9.840" 7.87 x 2 Natural Sheet — $752.32
- PEEK - 0.375" 24 x 48 Natural Sheet — $2856.17
Price
$4.01 / Each
In Stock
21010 availableAvailable at 11 locations
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
CategoryPEEK
FormRod
Length120 in
Outer Diameter0.25 in
Typical Properties — PEEK - 0.250" dia x 120 Black Rod
PeekGeneral
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.047 / 1.3
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %5/10 / 0.06/0.12
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%0.20
Water absorption (Saturation in water @ 73°F)ASTM D570%0.45
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94V-0/V-0
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa14,500 / 99
Tensile strain at breakASTM D638%15
Tensile modulusASTM D638psi / MPa566,000 / 3,900
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa20,000 / 135
Izod impact (notched)ASTM D256ft·lb/in / J/m0.8 / 42
Rockwell hardnessASTM D785R120
Operating Environment
PropertyTest MethodUnitValue
Melting temperatureASTM D2133°F / °C640 / 335
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K1.7 / 0.24
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C28 / 50
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C28 / 50
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C320 / 160
Max service temperature (Short-term)°F / °C590 / 310
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C480 / 245
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm610 / 24
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³
Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.