Ready Plastics
PA 6 - Cast NylonRodNatural

Cast Nylon - 4.500" x 39 Natural Rod - 39 in Rod

39 in Rod

Cast Nylon - 4.500" x 39 Natural RodCast Nylon - 4.500" x 39 Natural Rod - view 2Cast Nylon - 4.500" x 39 Natural Rod - view 3
Same-day shipping available
Quality certified
Expert support

This PA 6 - Cast Nylon rod measures 4.5″ diameter × 39″ length, finished in natural. In stock — price $166.79 per Each.

SpecificationValueTolerance
Shape / FormRod
Diameter4.5″Standard
Length39″Standard
ColorNatural
Weight28.03 lbs
About This Product

PA 6 - Cast Nylon rod in Natural Cast Nylon 6, sized 4.5" diameter x 39" long, is a dependable choice for machined parts that require strength, toughness, and wear resistance. This Natural cast nylon rod also offers good damping and low-friction performance, making it well suited for bushings, rollers, sheaves, and other industrial components.

Specifications

Shape

Rod

Length

39 in

Outer Diameter

4.5 in

Weight

28.03 lbs

Color

Natural

Unit of Measure

Each

Other PA 6 - Cast Nylon sizes

← All PA 6 - Cast Nylonstock & specs

Price

$166.79 / Each

In Stock
21010 available
Available at 11 locations

Minimum order: 3 units

View PA 6 - Cast Nylon Details
Ships same day if ordered by 2pm
Quality guaranteed
Quick Info
CategoryPA 6 - Cast Nylon
FormRod
Length39 in
Outer Diameter4.5 in
Weight28.03 lbs

Typical Properties — Cast Nylon - 4.500" x 39 Natural Rod

Cast Nylon 6
General
PropertyTest MethodUnitValue
DensityD792lb/in³ / g/cm³0.042 / 1.1
Water absorption (24 / 96 h immersion @ 73°F)ASTM D570mg / %44/83 / 0.65/1.22
Water absorption (Saturation in air @ 73°F, 50% RH)ASTM D570%2.2
Water absorption (Saturation in water @ 73°F)ASTM D570%6.5
Flammability rating (UL 94, 3 / 6 mm thickness)UL 94HB/HB
Mechanical
PropertyTest MethodUnitValue
Tensile strength (At yield / break)ASTM D638psi / MPa12,300 / 84
Tensile strain at breakASTM D638%25
Tensile modulusASTM D638psi / MPa508,000 / 3,500
Compressive stress (At 10% nominal strain)ASTM D695psi / MPa15,000 / 100
Izod impact (notched)ASTM D256ft·lb/in / J/m0.6 / 32
Rockwell hardnessASTM D785R118
Operating Environment
PropertyTest MethodUnitValue
Melting temperatureASTM D2133°F / °C430 / 220
Thermal conductivity (@ 73°F)ASTM C177Btu·in/ft²·h·°F / W/m·K2.0 / 0.28
Coefficient of thermal expansion (Avg. 73 – 140°F)ASTM D696μin/in/°F / μm/m/°C44 / 79
Coefficient of thermal expansion (Avg. 73 – 212°F)ASTM D696μin/in/°F / μm/m/°C50 / 90
Heat deflection temperature (264 psi (Method A))ASTM D648°F / °C355 / 175
Max service temperature (Short-term)°F / °C340 / 170
Max service temperature (Continuous (5,000 / 20,000 h))°F / °C220/195 / 100 / 90
Min service temperature°F / °C-30 / -34
Electrical
PropertyTest MethodUnitValue
Dielectric strengthASTM D149V/mil / kV/mm635 / 24
Volume resistivityASTM D257Ω·cm>10¹⁴
Surface resistivityASTM D257Ω>10¹³

Typical properties are provided for reference only. Values may vary based on processing conditions, form factor, and lot. Contact Ready Plastics for certified test data.

Related Products

Cast Nylon - 2.750" x 39 Natural Rod

Rod • 39 in

Cast Nylon - 0.500" 48 x 120 Natural Plate

Sheet • 0.5 in × 48 in × 120 in

Cast Nylon - 0.375" 48 x 120 Natural Plate

Sheet • 0.375 in × 48 in × 120 in

Cast Nylon - 7.500" x 39 Natural Rod

Rod • 39 in