PA6 MOLY (Moly-Filled Cast Nylon 6) — Sheet & Rod

PA6 MOLY is a molybdenum disulfide (MoS₂)-filled nylon material based on PA6. The MoS₂ filler acts as a solid lubricant, reducing friction and surface wear in sliding contact applications. It is used for bushings, guides, wear liners, and bearing surfaces that require extended dry-running performance.

Both are lubricated variants of PA6, but they use different lubricant types. PA6 MOLY uses molybdenum disulfide (MoS₂), a solid lubricant that excels at reducing friction under load and in sliding contact. PA6 OIL uses internal oil lubricants that provide smooth, quiet operation and are particularly effective in assemblies requiring low noise. The choice depends on the specific tribological demands of the application.

Yes. The MoS₂ filler in PA6 MOLY provides built-in boundary lubrication, allowing components to run dry in many applications. This reduces maintenance requirements and is an advantage in systems where applying external lubricants is impractical or undesirable.

PA6 MOLY is well suited for bushings, guide rails, wear liners, and bearing surfaces in material handling systems, automation equipment, industrial machinery, and mechanical assemblies. It is particularly effective where continuous sliding contact occurs and external lubrication cannot be reliably maintained.

Ready Plastics stocks PA6 MOLY in sheet form for precision machining. Contact Ready Plastics for current thickness ranges, dimensions, and availability.